WHY CRYOGEN X4?
THE CHALLENGE
With time, the compressor, evaporator, motor and condenser of a unit degrade and become less efficient. Here’s why:
THE CHALLENGE
Oil Fouling of HVAC/R systems heat-transfer surfaces will cause approximate efficiency losses of 7% in year one, 5% in year two and 2% per year the following years. Performance can be degraded by as much as 30% and higher due to the buildup of lubricants on internal surfaces.
Additionally, increased wear and tear due to poor lubrication leads to hotter operating temperatures which in turn accelerate friction and wear and tear. Even though oil fouling is the main problem, there are additional issues related to system performance degradation.
Routine service and maintenance are crucial for the operation and longevity of the HVAC unit but they do not restore the lost capacity inherent with all HVAC-R units.
Poor Heat Transfer
Degraded system performance: Evaporator and condenser cannot transfer adequate heat due to oil fouling and compromised internal heat exchangers.
Lost Efficiency
Over time the units lose efficiency due to wear and tear, oil migration, reduced heat transfer in the evaporator and condenser forcing the unit to run longer and less efficiently costing you more to operate. Replacing the unit is not economical.
Strained Compressor
Due to heat buildup and normal wear and tear the compressor works harder to overcome the loss in overall efficiency.
Shorter Compressor Life
Accelerated wear and tear, increased pressure, reduced performance. The compressor works much harder to achieve set temperatures causing premature and devastating failures.
WHY CRYOGEN X-4?
THE SOLUTION
By implementing our advanced solutions and performance know how, we are able to make the HVAC system more efficient.
THE SOLUTION
Better Efficiency
Increased lubrication and reduced friction lead to a better operating compressor as well as reduce wear and tear resulting in a better operating unit.
Better Refrigerant Flow
Reduced laminar friction within the system results in better refrigerant flow with less load on the compressor itself.
Improved Cooling
A cooler operating compressor “compresses” cooler refrigerant resulting in improved cooling.
Extended Equipment Life
All the above also result in reduced unscheduled maintenance and extended equipment life.
KEY BENEFIT
FOOTPRINT REDUCTION
CRYOGEN-X4® is environmentally friendly, and will help you reduce your carbon footprint!
KEY BENEFIT
CRYOGEN-X4® reduces energy usage at the unit by 10-30% and overall energy usage by 5-15%.
The United States Environmental Protection Agency (EPA) has determined that the 18,300 in kWh savings generated over a 10-year period by each single unit of CRYOGEN-X4® will avoid 12.9 metric tons of carbon dioxide emissions.
This is the equivalent to the greenhouse gas emissions from 2.7 passenger cars or the consumption of 1,447 gallons of gasoline each year.
TESTED
GOVERNMENT APPROVED
An 18-month study by the US government made the following conclusions about CRYOGEN-X4®:
APPROVED BY THE US GOVERNMENT
CRYOGEN-X4® provides substantial improvements in all systems treated, measured and verified.
CRYOGEN-X4® has no negative effect or impact on refrigerant flow within systems.
CRYOGEN-X4® achieves significant improvement in system heat exchange ability.
CRYOGEN-X4® continues to work throughout the useful life of the system.
ALL TESTING AND ACCREDITING ORGANIZATIONS
WARRANTY
INDUSTRY LEADING PROTECTION
PROTECTION
CRYOGEN-X4® comes with the best warranty package in the industry!
Any equipment treated is covered for life up to $1M.
Each site is covered for life up to $2M (more if needed).
Each site is covered for life up to $2M in lost revenues.
Free replacement if any unplanned or unrelated changes occur within 1 year of treatment.
OUR CLIENTS
INSTALLED BY GLOBAL BRANDS
Our products have been tested and installed by some of the largest companies in the world, including iconic brands like McDonalds, Costco, Starbucks, T-Mobile, and many others.
